Hello, welcome to visit the official website of Anhui Aics Technology Group Co., Ltd.!
400-1666-909

nybanner.jpg

Contact us

Anhui Aics Technology Group Co., Ltd.【Official Website】

National Free Hotline:400-1666-909

Company phone:0550-7622001 7622002
Meter:0550-7622003 7622006 Company fax:0550-7622005
Postcode:239300
Company email:aicsdL@163.com
Company address:Aics Industrial Park, Economic Development Zone, Tianchang City, Anhui Province

Integrated explosion-proof thermal resistance

Release time:2021-01-23 15:32:30Popularity:
  • [cimages:title]

product manual:

        ◆Working principle

        The change of the thermoelectric potential (resistance) measured by the thermocouple (resistance) in the working state will generate an unbalanced signal through the bridge of the temperature transmitter, which is amplified and converted into a 4-20mA electric signal to the working instrument and working instrument The corresponding temperature value is displayed.

        Explosion-proof thermocouple (barrier) uses the principle of gap explosion-proof, when an explosion occurs in the cavity, it can be extinguished and cooled through the gap of the joint surface, so that the flame and temperature after the explosion can not be transmitted outside the cavity, thereby measuring the temperature. The thermoelectric potential (resistance value) generated by the thermocouple (resistance) passes through the bridge of the temperature transmitter to produce an unbalanced signal, which is amplified and converted into a 4-20mA direct current signal to the worker's instrument. The working instrument displays the corresponding temperature value.

        ◆Main technical parameters

        Product performance standards 

        IEC584

        IEC751

        IEC1515

        JB/T5518-91

        JB/T7391-94

        ◆Measuring range and tolerance

        Thermal resistance temperature measurement range and tolerance

1-19111PU440261.jpg

       Output signal: 4-20 mA, load resistance 250, transmission wire resistance 100

       Output method: Two-wire system

       Accuracy level:

       Temperature transmitter accuracy grade: 0.1 0.2 0.5

       Display accuracy level: analog indicator type 2.5 level; digital display type 0.5 level.

       Power supply: 24V.DC±10℅

       Protection level: IP65

       Flameproof type: dⅡBT4 dⅡCT5 dⅡCT6

       Intrinsically safe type: iaⅡCT6

       Insulation resistance: The insulation resistance between the output terminal of the instrument and the housing should not be less than 50.

       Thermal response time:

       When there is a step change in temperature, the time required for the instrument's current output signal to change to 50% of the step change, usually t0.5 indicates when the temperature transmitter's step response stabilization time does not exceed the thermocouple When (resistance) thermal response stability time is one-fifth of t0.5, the thermocouple (resistance) thermal response time is used as the thermal response time of the instrument; when the step thermal response stability time of the temperature transmitter does not exceed the thermocouple (Resistance) When the thermal response stabilization time is half of t0.5, the thermal response time of the temperature transmitter is used as the thermal response time of the instrument;

       Basic error:

       The basic error of the instrument should not exceed the combined error of the basic error of the thermocouple (resistance) and the temperature transmitter.


Recommended information

400-1666-909